Before you start

Make sure that the IP addresses of the gateways will be consistent, either by IT binding the MAC address to a static IP (recommended) or by assigning a static IP.

The access point WebUI from 5. will list all gateways on the network with current settings as long as multicast is enabled in the network
For Wireless Zigbee, log in to the web ui of the gateway to set IP if needed
For Ethernet2DALI, see E2D commissioning
For DALI Complete you need to use an external tool, as the DALI gateway does not provide any WebUI
- Recommended to use free software like for example Lantronix - Device installer

Glamox Connect enabling

Connect the gateways to power and Ethernet.
- If DALI gateway, also connect DALI line(s)
Connect the LMS CONNECT Access Point to 230 V power and Ethernet.
Make sure the access point has access to the network where the gateways are connected.

Only the access point speaks to the Glamox Connect cloud. The access point communicates with all gateways and administers the two-way communication between the gateways and the cloud.

If your building doesn’t use a dynamic address IP go to the link: How to change DHCP to a static IP on Access Point

4. Check the serial number of the access point (5 digits).

5. Go to URL http://GlamoxConnectCore-<serial>.local

Example: http://GlamoxConnectCore-0000000008.local- if the serial is 0000000008
In some cases the URL can be without -. If the URL is not working try to remove -, like this:
http://GlamoxConnectCore0000000008.local

If your access point can’t find the gateways the main issue is probably that they are not on the same network. You can try to connect to the network yourself and search for devices - see “Alternatively”.

Alternatively - find a device from the MAC address:

Make sure you are connected to the same network as the device.
Then open a terminal (for example Command Prompt on Windows).
Type in “arp -a” and you will get a list of devices with their IP and MAC address (physical address).
Find the IP address (internet address) related to the MAC address of your access point.

Enter the IP address in the browser bar.

Open your browser and log in:
1. login: admin
2. Password is taken from the sticker on your device

7. Set the IP address of the access point in the IP field. There you can set the access point IP, network mask, gateway and name servers.

8. Click “Save!”. Configuration is done.

The IP settings of the access point is of no importance to Glamox Connect. Only the gateway IP’s are important in the setup.

For Glamox technicians to reach the device, it is set up with ZeroTier. This requires UDP 9993 to be open out of the network. If the network is set up with DHCP, it will automatically connect, and the technicians can reach the device. As a fallback, a USB 4G modem can be connected to bypass any firewalls while setting up the system.

9. Login to Glamox Connect using your existing user, or by creating a new User registration.

10. Create a new site and adopt the access point to your site Setting up a new site.

Network setup

Multicast (optional, access point to discover gateways)
DHCP (optional)
Internet access

Port	Protocol	What

Port	Protocol	What
8883	TCP	AWS MQTT
8443	TCP	AWS Calls
1883	TCP	AWS MQTT
443	TCP	AWS Calls
Any port	UDP	Access point upgrade, reporting++

We HIGHLY recommend isolating the lighting components in an own network, without access to other components at your internal network setup.

Glamox gateways only need to be discoverable and reachable from the access point

Access point(s) needs to communicate with gateways, as well as the Glamox cloud servers

DALI Complete gateway

To change the IP on the DALI gateway, use a free tool like Lantronix (https://www.lantronix.com/products/deviceinstaller/). Make sure you are connected to the same network and search for devices.

Choose the gateway you want to change on the left side menu and press “Assign IP”. Follow the instructions to configure the IP settings

The gateway has pullout panels on top and bottom of the front. Here you can find detailed information about the gateway like the MAC address.

Wireless Zigbee gateway

The Zigbee gateway has a WebUI for easy setup. This WebUI can be reached at http://ubisys-g1-<serial>.local, replacing <serial> with the serial from your gateway. (Ex: ubisys-g1-2507.local).
Alternatively, you can open the gateway's IP address, default http://192.168.0.211.
You can change the network settings of the gateway under “Network settings”.

Ethernet2DALI

For information on setting up Ethernet2DALI, see our own documentation space for this system
Ethernet2DALI

Glamox Connect