Floorplans

Floorplans are visable on the in the Floorplan tab. They will provide you with the general lighting layout and allow you to check the status of cerain devices.

This layout has to be created for you to use it. After adopting all the Glamox Connect components and discovering all devices Devices you will be ready to create the layout of your site.

Site layout creation

To create the layout of your site, go to Settings and Site.

Now go to Site Layout. Here you can add your floorplans, create rooms per floorplan and place your devices.

Floorplan

First add your floorplan(s). You can design the site layout as you want, either with floorplan as the entire site, a floor, selected rooms or even a single room. You can also rearrange the floorplans using drag and drop.

After adding a floorplan you will see a 3 step flow

Upload floorplan image - allows you to upload an image
Define rooms - allows you to create names of rooms on a specific floorplan
Position devices on floorplan

For full use of the features in Glamox Connect we recommend that you add a floorplan image and create rooms and assign devices to both.

Placing devices on floorplan

After adding the floorplan image and creating rooms for the floorplan, you move on to placing devices on floorplan.

On the left side you will see all the devices from your installation not yet placed on a floorplan. You can expand the device information to see helpful details and identify the device. After identifying the device you can drag and drop the icon on to the drawing

After dropping the device on the floorplan you will get a commissioning help menu on the right side. Her you can add the device name, assign it to a room and select the Glamox article number.

To speed up your commissioning you can also check the box Copy from previous device to prefill room and article number. This is very helpful if you commission all devices room by room, article by article, or even better if you have same articles in same room.