/
How to change DHCP to a static IP on Access Point

How to change DHCP to a static IP on Access Point

Owned by Sylwester Mącznik
Last updated: Sept 07, 2023 by Joanna Kozakiewicz

1. Connect a LAN cable directly to the Access Point

Connecting to ATLAS

 

Connecting to Revpi

2. Change Ethernet card settings to automatic

3. Check the serial number of the Access Point (5 digits).

-This is where you will find it if you have a revpi:

-This is where you will find it if you have a ATLAS access kit

 

Related content