/
How to change DHCP to a static IP on Access Point
How to change DHCP to a static IP on Access Point
1. Connect a LAN cable directly to the Access Point
Connecting to ATLAS
Connecting to Revpi
2. Change Ethernet card settings to automatic
3. Check the serial number of the Access Point (5 digits).
-This is where you will find it if you have a revpi:
-This is where you will find it if you have a ATLAS access kit
, multiple selections available,
Related content
Setting up the components - LMS CONNECT Access Point
Setting up the components - LMS CONNECT Access Point
More like this
Setting up the components - revpi
Setting up the components - revpi
More like this
LMS CONNECT Access Point
LMS CONNECT Access Point
Read with this
Discovering an Access Point MAC Address
Discovering an Access Point MAC Address
More like this
Emergency light setup
Emergency light setup
Read with this
Setting up a new site
Setting up a new site
More like this