1. Creating a new project

Owned by Katarzyna Stodolny
Last updated: Oct 23, 2024 by Matthew Hill
2 min read

If it's your first contact with the system, you'll need to set up your tablet first. Go to Downloading the App and follow the steps.

If you want to download an existing project, see Downloading an existing project.

In this article you will learn how to create a new project using the WR Tablet. If you have already created your first project and now you want to create another project on the same tablet, follow the instructions below.

Step by step instructions

  1. Make sure you have internet access to your tablet.

  2. Select the Postcode/Site ID [1].

image-20240118-104852.png

3. Select Add New Site [2].

image-20240118-105450.png

4. Enter the Postcode/Site ID [3].

Do not use special characters ‘-' or '_’ when entering the Site ID

5. Select Validate, then Register and Download [4].

6. It will prompt you to add the new Postcode/Site ID, select Yes [6] and then Close.

7. The Postcode (Project reference) should now be added to the Tablet section on this page [6]. Select the Postcode (Project reference) to make it active on the tablet and you will then be able to begin commissioning.

The next step: Importing & Creating drawings

Â