2. Importing & Creating drawings
This article has two sections:
https://glamox.atlassian.net/wiki/spaces/WR/pages/2352250881/2.+Importing+Creating+drawings#Importing-drawings
https://glamox.atlassian.net/wiki/spaces/WR/pages/2352250881/2.+Importing+Creating+drawings#Creating-drawings
Importing drawings
All imported drawings need to be converted to 1220 pixels x 660 pixels.
Select Drawings [1].
2. Select New [2] and then Browse [3].
Select the required drawing from the file manager.
Enter the drawing width and click Save [4].
Creating drawings
If no drawings exist, then manual drawings can be created:
Select Drawings [1].
Select New [2] and then Create [3].
Enter a Filename for the drawing.
Enter an 'x' dimension for the width of the area being created.
Once created click
Modify to:
add a Door(s)
add a Window(s)
add simulated furniture
add a 600x600 or 1mx1m ceiling grid
block out areas to reflect the room’s shape
If you add any of these modifications you must click save before being able to proceed.