The commissioning software allows you to replace drawings with others. This is useful if, for instance, you have created your own drawing to commission devices and then receive formal site plans.

In Order to Replace a Drawing

1. Click Drawings [1].

Open

2. Select the drawing from the drop down menu you want to replace [2].

3. Click Modify, then Replace.

4. You will see the following warning message, click Yes.

Open

5. Locate and select the new drawing you want to replace the existing drawing with.

6. If you wish to rename the new drawing, click ‘Rename’ and click ‘Accept’.

7. Click the ‘Luminaires’ tab to go back to the main commissioning page.