1. Setting up the network

The Vertex controller can work as a stand-alone system, but connecting them to a LAN network (using NetConfig) is recommended, as it makes the commissioning and monitoring easier.

Connect to the Vertex with a mobile or PC. Then, use NetConfig to set up the network.

How do you connect?

Open

Connecting to the Vertex with a mobile

1. Make sure that the USB Wi-Fi card is plugged into Vertex and that the mobile is in the Wi-Fi range.

Open

2. Find the Wi-Fi and connect.

3. Enter http://172.24.1.1/netconfig in your browser (you can use the QR code) and follow the instructions.

4. At the end of the NetConfig process, all controllers are rebooted.

Connecting to the Vertex with a PC

1. Make sure that the USB Wi-Fi card is plugged into Vertex and that your PC is within the Wi-Fi range.
   
   

2. Find the Wi-Fi and select Connect.

3. Select Connect using a security key instead.

4. Put in the 8 first digits of the MAC.

5. When connected to Vertex, in the web browser enter http://172.24.1.1/netconfig

6. At the end of the NetConfig process, all controllers are rebooted.

NetConfig - setting up the network

Follow the step-by-step instructions in the interface.

At the end of the NetConfig process, all controllers are rebooted.

The next step: How to get into Vertex GUI?