This documentation applies to the E2D system using VERTEX 2 & 3 with CLASSIC UI and software versions up to 3.1.29. If you have VERTEX 3 with software version 3.1.30 or higher, go to Glamox Ethernet2DALI |
|---|
(Classic) E2D components
The Ethernet2DALI (E2D) LMS components are selected and qualified. The list of them can be found on the Glamox website.
- (Classic) LMS E2D VERTEX APC G3
- (Classic) LMS E2D REMOTE ACCESS KIT
- (Classic) Panel: LMS DALI-2 SWITCH PANEL
- (Classic) Panel: LMS DALI-2 SM CROSS NFC WH
- (Classic) Sensor: LMS DALI-2 PIR CLS OS SENSOR 5M
- (Classic) Sensor: LMS DALI-2 PIR CLS SENSOR 5M
- (Classic) Sensor: LMS DALI-2 PIR CLS SENSORHEAD 10M
- (Classic) Sensor: LMS DALI-2 PIR CLS SENSORHEAD 16M
- (Classic) Sensor: LMS DALI-2 PIR CLS LA SENSOR-R
- (Classic) Sensor: LMS DALI-2 PIR CLS SENSOR-R LONG
- (Classic) Relay unit: RM8 & RM16
- (Classic) LMS E2D 6xINPUT MODULE
- (Classic) LMS E2D IND SWITCH
- (Classic) Toltec CV (PAC583789)
- (Classic) 4-channel programmable relay (TSP22185237)
- (Classic) Phase dimmer DALI 300 W (TC-0T3-2800226)
- (Classic) Integrated sensor CPD2-SEN
- (Classic) V-TOUCH S
- (Classic) LMS DALI-2 PIR CLS PRESENCE SENSOR-R
- (Classic) LMS DALI-2 PIR CLS CORRIDOR SENSOR-R
- (Classic) LMS DALI-2 PIR CLS High Bay Sensor-R
- (Classic) LMS DALI-2 PIR CLS CORRIDOR SENSOR-R rc
The Ethernet2DALI (E2D) system works with DALI and DALI-2 luminaires (both general and emergency).
The basic actuators of the lighting system are general lighting luminaires equipped with DALI-compatible power supplies, ballasts or relays. VERTEX controls the luminaires’ light intensity based on the pre-programmed logic via appropriate digital messages.
Emergency lighting luminaires (safety sign and escape route lighting) ensure safety on the evacuation routes in the event of a power outage in accordance with the EN 1838 and EN 50172 fire safety standards. Using the DALI bus, the VERTEX control unit can remotely trigger the luminaire tests and automatically collect the results.