This documentation is for older software versions (up to 3.1.29). If you have software version 3.1.30 or higher, go to MODERN Home |
|---|
(Classic) LMS E2D REMOTE ACCESS KIT
- Katarzyna Stodolny
- Joanna Kozakiewicz
It is a GSM gateway that provides an internet connection. It is especially useful when there is no internet on site or the connection is difficult.
The LMS E2D REMOTE ACCESS KIT provides:
easy remote support when commissioning the E2D system,
the ability to diagnose errors during remote support.
How to use it in the LMS design?
The LMS E2D REMOTE ACCESS KIT must be connected to an Ethernet LAN switch with a U/FTP 5e cable. See more LAN design principles.
Technical parameters
Power-on optical indication | YES - LED |
|---|---|
Max. current consumption | 50 mA |
Max. power consumption | 12 W |
Ethernet Port | 10/100 Mbit/s RJ45 |
GSM frequency bands | LTE-FDD: B1/B3/B7/B8/B20/B28A WCDMA: B1/B8 GSM: B3/B8 |
How to commission it?
Status LEDs
LED | Status | Description |
|---|---|---|
GSM | Solid | Acceptable GSM coverage |
Flashing | Poor GSM coverage (install an outdoor antenna) | |
Off | No GSM coverage (install an outdoor antenna) | |
ERR | Solid | Start error |
Flashing | EEPROM data read error | |
Off | Correct start | |
Cloud | Solid | Correct connection with Cloud |
Flashing | No connection with Cloud |