This article has two sections:

https://glamox.atlassian.net/wiki/spaces/WR/pages/2352250881/2.+a.+Importing+Creating+drawings#Importing-drawings

https://glamox.atlassian.net/wiki/spaces/WR/pages/2352250881/2.+a.+Importing+Creating+drawings#Creating-drawings

Importing drawings

All imported drawings need to be converted to 1220 pixels x 660 pixels, this includes a 60 pixel frame you need to add for ease of use.

Select Drawings [1].

2. Select New [2] and then Browse [3].

Select the required drawing from the file manager.

Enter the drawing width and click Save [4].

If your imported drawings has a diagnal outline and you want your drawing to include that enter the modifying mode and long click on a corner and red dots will appear on corners of the drawing. This will allow you to move corners. If you want to add an additional point to a line simply long click on a line where you want to brake it and an additional red dot will appear.

Note: If you move an outline some objects like windows and doors might not work correctly.

Creating drawings

If no drawings exist, then manual drawings need to be created. Remeber not to use the Area 1 drawing and create a new drawing or you will be forced to delete your drawing.

Select Drawings [1].

Select New [2] and then Create [3].

Enter a Filename for the drawing.
Enter an 'x' dimension for the width of the area being created.
Once created click

Modify to:

add a Door(s)
add a Window(s)
add simulated furniture
add a 600x600 or 1mx1m ceiling grid
block out areas to reflect the room’s shape

If you add any of these modifications you must click save before being able to proceed.

Glamox Wireless Radio

2. a. Importing & Creating drawings

This article has two sections:

Importing drawings

Creating drawings

The next step: Site Maps

Related pages