/
(Classic) Creating lighting scenes

This documentation applies to the E2D system using VERTEX 2 & 3 with CLASSIC UI and software versions up to 3.1.29. If you have VERTEX 3 with software version 3.1.30 or higher, go to Glamox Ethernet2DALI

(Classic) Creating lighting scenes

Owned by Katarzyna Stodolny
Mar 31, 2023
1 min read

Scenes are predefined lighting settings in which luminaires have various brightness levels, e.g. some luminaires are switched off and the lighting intensity of other luminaires is reduced. In this article, you will learn how to configure scenes using the Vertex GUI.

Instructions

  1. Go to the Scenes section in the Vertex GUI.

In the Instructions, you can read useful remarks about lighting scenes.

2. Select the group for which you want to define a scene.

3. Using the Scenes table, you can define up to 16 scenes for the selected group.

4. Remember to Save after entering data.