(Classic) Sensor: LMS DALI-2 PIR CLS OS SENSOR 5M

Compare with a similar sensor LMS DALI-2 PIR CLS SENSOR 5M

The multisensor is dedicated to low-bay applications, e.g. offices or schools. There are two components available: the sensor with the recessed mounting kit and the ceiling mounting kit.

The multisensor with the recessed mounting kit (both sensor and mounting kit are included):

LMS DALI-2 PIR CLS OS SENSOR-R 5M

The surface ceiling mounting kit (without the sensor):

LMS DALI-2 MNT KIT OS SENSOR-S 5M

How to use it in the LMS design?

To place the multisensor in the project, you need to remember the typical Ethernet2DALI limitations.

By using the covers attached to this sensor, you will be able to adjust the detection area shape. You can narrow the detection angle and in this way e.g. avoid detecting the movement in unwanted areas like the corridor.

How to commission it?

To program logic within the Node-RED tool you need to use a DALI2 Devs Common node, which is available in the node palette on the left-hand side of Node-RED UI.

Click this node to enter the configuration window. Choose the serial number of the device in the Serial Number field. Uncheck the Motion/presence sensor checkbox. Below you have two fields where you can set the presence and transition time duration.

Then click Done in the upper right corner of the window.

Then you need to find the vertex action node in the palette. Set Mode as Motion sensor. Then select the group you want to control by this multisensor. Next, you should define actions in Presence, Transition, and No presence fields. Define these actions as you need.

Don't forget to connect all your nodes and be sure that the vertex cluster node is present in your flow!

Then click Deploy button at the upper-right corner of the Node-RED.

Import the ready flow using the code below:

[
    {
        "id": "e0e1af9.6a3855",
        "type": "DALI2 Devs Common",
        "z": "810b6cdc.028bf",
        "name": "",
        "outputs": 1,
        "uid": "D7BFBFCF00891400",
        "savedSettings": [
            {
                "instanceType": 3,
                "isDisabled": false,
                "dali2t1": "",
                "dali2t2": ""
            },
            {
                "instanceType": 4,
                "isDisabled": true
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            },
            {
                "instanceType": 1,
                "isDisabled": true,
                "mode": "normal"
            }
        ],
        "x": 400,
        "y": 180,
        "wires": [
            [
                "3ad2631c.8574cc"
            ]
        ]
    },
    {
        "id": "3ad2631c.8574cc",
        "type": "vertex action",
        "z": "810b6cdc.028bf",
        "name": "",
        "typeButton": "motionsensor",
        "bPayload": {
            "PRESENCE": {
                "action": "noreact",
                "group": "0327ffd20adbd58c2cf40fa8b12b9304",
                "param": null,
                "priority": "255"
            },
            "TRANSITION": {
                "action": "noreact",
                "group": "0327ffd20adbd58c2cf40fa8b12b9304",
                "param": null,
                "priority": "0"
            },
            "NOPRESENCE": {
                "action": "noreact",
                "group": "0327ffd20adbd58c2cf40fa8b12b9304",
                "param": null,
                "priority": "254"
            }
        },
        "bState": "",
        "defaultpriority": true,
        "x": 620,
        "y": 180,
        "wires": [
            [
                "ad4e04de.d85e18"
            ]
        ]
    },
    {
        "id": "ad4e04de.d85e18",
        "type": "vertex cluster",
        "z": "810b6cdc.028bf",
        "userouting": false,
        "rate": 5,
        "x": 810,
        "y": 180,
        "wires": []
    }
]