Site layout

Owned by Nils Ove Erstad
Last updated: Nov 11, 2021
3 min read

After adopting all the Glamox Connect components and discovering all devices, you are now ready to create the layout of your site

All devices

After initial import of devices, all your devices can be viewed in the device list, All devices. All information from local system that is not available to Glamox Connect (dependent on system) will be replaced by placeholders, i.e. given name.

Here you can also view details for the devices by clicking Detail page on the device.

From the detail page you can also edit the device to give name, wattage, floor, room and add integration to Glamox product database through article number.

Site layout

To create the layout of your site, go to Site Layout (Site settings → Site Layout). Here you can add your floorplans, create rooms per floorplan and place your devices.

Floorplan

First add your floorplan(s). You can design the site layout as you want, either with floorplan as the entire site, a floor, selected rooms or even a single room. You can also rearrange the floorplans by drag and drop.

 

After adding a floorplan you will see a 3 step flow

  1. Add floorplan image

  2. Add rooms to floorplan

  3. Place devices on floorplan image

For full use of the features in Glamox Connect we recommend that you add a floorplan image and create rooms and assign devices to both

Placing devices on floorplan

After adding the floorplan image and creating rooms for the floorplan, you move on to placing devices on floorplan.

On the left side you will see all the devices from your installation not yet placed on a floorplan. You can expand the device information to see helpful details and identify the device.

After identifying the device you can drag and drop the icon on to the drawing

 

After dropping the device on the floorplan you will get a commissioning help menu on the right side. Her you can add the device name, assign it to a room and select the Glamox article number.

To speed up your commissioning you can also check the box Copy from previous device to prefill room and article number. This is very helpful if you commission all devices room by room, article by article, or even better if you have same articles in same room.