Sensor: LMS DALI-2 PIR CLS SENSORHEAD 16M
- Katarzyna Stodolny
- Joanna Kozakiewicz
- Sylwester Mącznik
The multisensor is suitable for ceiling heights up to 16m in applications such as factory buildings, storage buildings, warehouses, shopping centers, entry areas and passages.
B07004009
The sensor-head must be used together with the mounting device:
B07004007
Sensor covers
Sensor covers give the ability to reduce the detection area in aisle applications. These covers can be simply attached or removed from the front of the sensor at any time.
B07004010
Usage: This sensor cover is used in aisles between storage racks, so the sensor does not react to movement in the adjacent aisles.
B07004008
Usage: This sensor cover is used in open spaces. The cover ensures that people moving in the adjacent space will not activate the lights.
B07004011
Usage: This sensor cover is used in entrances, so only the person entering the room will turn on the light.
How to use it in the LMS design?
When using the multisensor in a project, you need to remember the typical Ethernet2DALI limitations.
How to commission it?
Go to Sensor Commissioning
For other sensors look here: E2D components