Duplicating profiles across multiple projects
- Matthew Hill
- Joanna Kozakiewicz
If you have a large project with multiple Site IDs and want to use the same profile settings as another site, but do not want to manually set up the profile settings again continue with the following instruction to achieve this.
Before you start you need to know the SiteID with the profiles you want to duplicate.
For example:
I want to duplicate the profiles I have from Site A: ID ‘SO31 8AW’ to Site B: ID ‘PO4 9PA1’.
Make sure you have uploaded/sync’d the project you want to use the profiles from (Project A)to the server, if not, follow the instruction 8. Backup
Enter the project you want the new profiles to be duplicated to (in this cases Site B PO4_9PA2) [1].
Click on the ‘Profiles’ tab [2] and long click on ‘Rename’ [3].
Enter the SiteID A with the profiles you want use and click ‘Save’ (Example in this case would be A SO31_8AW).
Click ‘Yes’ to delete the current profiles and override them with the other SiteID profiles.
This will now take you back to the luminaires page.
Go back to the ‘Profiles’ tab and select the drop down box to check if all the profiles have been transferred across.