Kinetic switch troubleshooting

Kinetic switch will not pair and previously used with another system

Some models of kinetic switch can be reset to its default settings (factory reset). To execute such an operations the rockers and the switch housing have to be removed.

Then press down all of the four button contacts [1]. Now press on the energy bow [2] and hold for 10s. Release the energy bow, click it, release and then hold for another 10 seconds.

Open

Kinetic switch proper placement

Kinetic switch can be confusing to mount. To check which way is up dismantle the buttons and check the A and B marked on the switch - A should be on the left, B on the right. You can also look at the O and I parameter - 0 should be on top and I on the bottom.

Open