Emergency Monitoring

Owned by Jakub Cupiał
Last updated: Jun 11, 2024 by Joanna Kozakiewicz
3 min read

Under Emergency you can monitor your emergency installation. You get a quick overview of the state of your installation, upcoming tests (if scheduled in Glamox Connect) as well as emergency reports.

Test and maintenance

Test and maintenance can be found in Emergency tab [1] at main menu

0.png

Test and maintenance will show you the current status of your installation, the number of emergency devices in your installation and the time of last update from the installation. If you have any faults you can press See more [2] to go to the Issue handler to see the details of your fault(s) and handle the faults.

1.png

Reports

To generate a report, choose a time interval you want the report to cover [3] and press Generate [4]. Pending on the length of the time interval the system needs some time to generate the report and present it.

 

The report is split into three sections:

  • Test overview (Emergency Light)

    • Key numbers for the tests performed in the chosen time interval

  • Current status

    • The current status of your system at the time of report generation

  • Full report

    • Full report of all tests performed in the time interval for all emergency devices in your installation. If a device has had faults during the chosen time interval, the error details and the log from the issue will be displayed for that device.

The report can also be printed by using the Print [5] button.

Upcoming tests

The group test scheduler will show the nearest upcoming tests per group. Press See more [6] to see a more complete list of all groups.

 

 

Upcoming tests are only listed if it is scheduled through Glamox Connect. You can do this in Settings.