Energy monitoring

Owned by Nils Ove Erstad
Last updated: May 12, 2020
2 min read

In Glamox Connect you can get an overview of the power consumption of your connected installation. In addition to an overview, this also gives you the possibility to look for consumption increases, anomalies and more.

The main graph shows the power consumption graph for the selected time period. The selected period is shown as main graph curve, with a previous period added for comparison. The comparison “shadow” will for all* time periods be the selected time period starting before the main time period meaning that if you choose Last week it will compared with the week before. If you choose Last 4 weeks it will compare with the 4 weeks before that.
* Only exception is Yesterday that will compare with the same weekday the week before.

Note that the comparison is only shown when you have only one graph chosen. If you have 2 or more rooms/floorplans etc, the comparison will not be shown.

You can also use the Filter function to select the floorplan(s) and room(s) you want show in the graph.

Widgets

There is also some quick information widgets, same as shown on the overview page.

Real time consumption: Showing the real-time power consumption of your lighting installation

Site total consumption - Last week: Last weeks total consumption, also compared to week before.

Carbon footprint: Carbon emission of your installation, calculated from parameters in Settings