Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

A factory reset restores the factory settings on the Vertex. Do this directly from the front panel of the Vertex.

A factory reset will permanently remove the existing addressing, grouping and logic.

Instructions

  1. Press the Power button in the following sequence:

    press (5 seconds), release (1 second), press (5 seconds), release (1 second), press (5 seconds), release

2. The Status LED will start to flash red.

3. Vertex will now reboot and restore the factory settings. This may take some time (up to several minutes).

  • No labels