LMS Wireless Access Point

Necessary components

LMS WIRELESS ACCESS POINT: Industrial & Office

Factors to consider when installing an Access Point

When installing an ACCESS POINT make sure that it is located in range of at least 20 luminaires in a 75m radius, preferbaly in the center of the luminaires and not in enclosed areas.

Locations it is good to avoid when placing an ACCESS POINT in the system are storage areas, areas containing equipment such as boilers, Air-Con units, server racks, corner areas of a building. Depending on building characteristics like concrete, steel, machinery or thick walls will impact the quantity of luminaires which report to an individual ACCESS POINT, in those cases you might need a bigger amout of ACCESS POINTs in your system to cover all areas. Lights can report to more than one ACCESS POINT. If you require additional coverage more ACCESS POINTs can be added at anytime and no additional commissioning will be required.

ACCESS POINTs need a power supply and a connection to the internet. Glamox supply versions for 4G, Ethernet or Wi-Fi connection.

Connections

ACCESS POINTs can be supplied with 4G connections or Ethernet and Wi-Fi adapters.

4G

• An add-on package is available with 12 months data. At the end of the 12 month period, clients can maintain their own SIM contracts.

• It provides connectivity without involving the client’s IT infrastructure and is generally suitable for all environments which receive a mobile signal.

• Monitoring uses approximately 1 Gb per 1,000 luminaires per month.

Ethernet

• Provides a free wired communication.

• Ethernet is free from interference of Wi-Fi networks, walls or other physical barriers.

• When using this option it is important to consider the feasibility of installing Ethernet points across an existing building to ensure full coverage.

Wi-Fi

• Wi-Fi provides a connection where it is difficult to install Ethernet points.

• When using this option is important to consider the stability of the Wi-Fi connection in the building. If the Wi-Fi fails or the password changes, then the ACCESS POINT will lose connection to the internet and, without providing an alternative connection, cannot be re-established.

Security - Ethernet & Wi-Fi Only

The internet connection requires DHCP and the following permissions:

Power Consumption

• 3 W minimum

• 5 W average

• 15 W peak

LED Status Codes

Green Status:

Red Status: