What do I need?

To connect your LMS system to Glamox Connect you need an access point as well as a gateway(s) connected to your local installation.

The access point is the one point connected to Glamox Connect. The access point communicates to the gateway(s) on the local network.

Open

Components

1. Access point - LMS CONNECT Access Point

2. Local gateways to your systems:

   1. Ethernet2DALI (E2D) - https://glamox.atlassian.net/wiki/x/AQB4aQ (if you already have it in your installation, you don’t need to add another one) with internet connection

   2. Wireless Zigbee - LMS ZIGBEE https://glamox.atlassian.net/wiki/x/BIArn

   3. DALI Complete - https://glamox.atlassian.net/wiki/x/AQClhQ

3. Ethernet switch ports for all access points - you can use https://glamox.atlassian.net/wiki/x/OQBPb

4. Internet connection

Gateways limits

There is no hard limit to the number of gateways to 1 access point but recommendations are as follows:

• Ethernet2DALI - max 25 gateways (one cluster) per access point

• Wireless Zigbee - max 10 gateways per access point

• DALI Complete - max 8 gateways per access point