Sensor

ZIGBEE PIR CLS SENSOR is a multisensor designed for the Glamox Wireless ZigBee system.

It joins the functionality of daylight and movement/detection sensors. It can detect even slight, few-centimeters movements at the desk so it is suitable for areas like offices and classrooms, but also for corridors and main halls. It is recommended to install this multisensor in rooms up to 3 m high.

LMS ZIGBEE PIR CLS SENSOR Mod 01

The sensor-head must be used together with the mounting device:

Device features

• Movement/occupancy detection (PIR) and daylight harvesting functionality

• Simple, 2-wire power supply

• Designed for indoor environments e.g. offices, classrooms, corridors

• Can be configured and maintained within the Glamox Wireless ZigBee app

• Control app for the end user via wUser

• Build-in antenna for Bluetooth Low Energy (BLE) and ZigBee communication

How to use it in the LMS design?

Limitations

• The maximum number of multisensors in one group:

  • 40 for full autonomy - only multisensors in the group

  • 30 for a group with ZigBee switches

  • 20 for a group with enabled energy reporting functionality

• Maximum distances (in the line of sight) between ZigBee devices:

  • 12 m between multisensors

  • 10 m between ZigBee switch and the first multisensor

• The maximum number of switches in one group is 5.

• A single sensor can cooperate with up to 4 luminaire drivers (in case of tunable white, only 1 driver).

• When using a gateway (Glamox Connect), the maximum number of multisensors in one network connected to the gateway:

  • 100 - only multisensors in the network, together with the latest firmware (2.0.20)

Detection area

Major movement

Minor movement

How to commission it?

The device can be commissioned and configured via the commissioning app - Glamox Wireless ZigBee which you can find for both Android and for iOS. Additional user application - wUser, enables end users to control the light intensity of luminaires.

See how to start Commissioning of Wireless Zigbee.