...
...
...
...
...
...
Before you start
Make sure that the IP addresses of the gateways will be consistent, either by IT binding the mac MAC address to a static IP (recommended) or by assigning a static IP.
The Access access point WebUI from 5. will list all gateways on the network with current settings as long as multicast is enabled in the network
For Wireless Zigbee, log in to the web ui of the gateway to set IP if needed
For Ethernet2DaliEthernet2DALI, see E2D commissioning
For DALI Complete you need to use an external tool, as the DALI gateway does not provide any WebUI
Recommended to use free software like for example Lantronix - Device installer
Glamox Connect enabling
Connect the gateways to power and ethernetEthernet.
If DALI gateway, also connect DALI line(s)
Connect the access point (LMS CONNECT RevPi Core 3 8 GB) Access Point to 230 V power and ethernetEthernet.
Make sure the access point has access to the network where the gateways are connected.
...
| Note |
|---|
If your building doesn’t use a dynamic adress address IP go to the link: How to change DHCP to a static IP on Access Point |
...
5. Go to URL http://GlamoxConnectCore-<serial>.local
Example: http://GlamoxConnectCore-0000000008.local- if the serial is 0000000008
In some cases the URL can be without -. If the URL is not working try to remove -, like this:
http://GlamoxConnectCore0000000008.local
| Note |
|---|
If your access point can’t find the gateways the main issue is probably that they are not on the same network. You can try to connect to the network yourself and search for devices - see “Alternatively”. |
Alternatively - find a device from the mac MAC address:
Make sure you are connected to the same network as the device.
Then open a terminal (for example Command Prompt on Windows).
Type in “arp -a” and you will get a list of devices with their IP and mac MAC address (physical address).
Find the IP address (internet address) related to the MAC address of your access point.
...
Enter the IP address in the browser bar.
Now you want to open Open your browser and loginlog in:
login: loginadmin
Password is taken from the sticker on your device
...
67. Set the IP address of the RevPi access point in the IP field. There you can set the access point IP, network mask, gateway and name servers.
...
78. Click “Save!”. Configuration is done.
| Info |
|---|
The IP settings of the Access access point is of no importance to Glamox Connect. Only the gateway IP’s are important in the setup. |
| Info |
|---|
For Glamox technicians to reach the device, it is set up with ZeroTier. This requires UDP 9993 to be open out of the network. If the network is set up with DHCP, it will automatically connect, and the technicians can reach the device. As a fallback, a USB 4G modem can be connected to bypass any firewalls while setting up the system. |
89. Login to Glamox Connect using your existing user, or by creating a new User registration.
910. Create a new site a and adopt the access point to your site Setting up a new site.
Network setup
Multicast (optional, access point to discover gateways)
DHCP (optional)
Internet access
...
| Note |
|---|
We HIGHLY recommend isolating the lighting components in a an own network, without access to other components at your internal network setup. Glamox gateways only needs need to be discoverable and reachable from the access point Access point(s) needs to communicate with gateways, as well as the Glamox cloud servers |
DALI
...
Complete gateway
To change the IP on the DALI gateway, use a free tool like Lantronix (https://www.lantronix.com/products/deviceinstaller/). Make sure you are connected to the same network and search for devices.
...
The gateway has pullout panels on top and bottom of the front. Here you can find detailed information about the gateway like the mac MAC address.
Wireless Zigbee gateway
The Zigbee gateway has a WebUI for easy setup. This WebUI can be reached at http://ubisys-g1-<serial>.local, replacing <serial> with the serial from your gateway. (Ex: ubisys-g1-2507.local).
Alternatively, you can open the gateways gateway's IP address, default http://192.168.0.211.
You can change the network settings of the gateway under “Network settings”.
Ethernet2DALI
For information on setting up Ethernet2DALI, see our own documentation space for this system
Ethernet2Dali
Tested 4G modems
Huawei E3531
Note: USB 4G modems that acts as a network interface, without PIN code, can work. Try on your own machine to verify no drivers are needed, and the dongle acts as a normal network interface (no special software required)Ethernet2DALI