ZIGBEE PIR CLS SENSOR is a multisensor designed for the Glamox Wireless Zigbee system.
It joins the functionality of daylight and movement/detection sensors. It can detect even slight, few-centimeters movements at the desk so it is suitable for areas like offices and classrooms, but also for corridors and main halls. It is recommended to install this multisensor in rooms up to 3 m high.
LMS ZIGBEE PIR CLS SENSOR Mod 01
The sensor-head must be used together with the mounting device:
LMS ZIGBEE MNT SENSOR-R
LMS ZIGBEE MNT SENSOR-S
Device features
Movement/occupancy detection (PIR) and daylight harvesting functionality
Simple, 2-wire power supply
Designed for indoor environments e.g. offices, classrooms, corridors
Can be configured and maintained within the Glamox Wireless ZigBee app
Control app for the end user via wUser
Build-in antenna for Bluetooth Low Energy (BLE) and ZigBee communication
How to use it in the LMS design?
Limitations (stand from the firmware 2.0.20):
The maximum number of multisensors in a single group - 120.
The maximum number of switches in a single group - 15.
Maximum distances (in the line of sight) between Zigbee devices:
12 m between multisensors
10 m between ZigBee switch and the first multisensor
A single sensor can cooperate with up to 4 luminaire drivers (limited to 1 driver per sensor to support Tunable White and Energy Reporting features).
For the earlier firmware versions, limitations are given:
The maximum number of multisensors in a single group:
40 for full autonomy - only multisensors in the group
30 for a group with ZigBee switches
20 for a group with enabled energy reporting functionality
The maximum number of switches in one group - 5.
Detection area
Major movement
Height (m) | X1 (m) | Y1 (m) |
|---|---|---|
2.4 | 2.9 | 4.3 |
3.0 | 3.6 | 5.4 |
Minor movement
Height (m) | X1 (m) | Y1 (m) |
|---|---|---|
2.4 | 1.9 | 2.9 |
3.0 | 2.4 | 3.6 |
LED indicator | 🔴 - motion detected |
Add Comment