This article has two sections:
Importing drawings
Select Drawings [1].
2. Select New [2] and then Browse [3].
Select the required drawing from the file manager.
Enter the drawing width and click Save [4].
Creating drawings
If no drawings exist, then manual drawings can be created:
Select Drawings [1].
Select New [2] and then Create [3].
Enter a Filename for the drawing.
Enter an 'x' dimension for the width of the area being created.
Once created click
Modify to:
add a Door(s)
add a Window(s)
add simulated furniture
add a 600x600 or 1mx1m ceiling grid
block out areas to reflect the room’s shape
If you add any of these modifications you must click save before being able to proceed.
Add Comment