This documentation is for older software versions (up to 3.1.29). If you have software version 3.1.30 or higher, go to MODERN Home
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The E2D system works with both the new generation Application Controller - Vertex 3, and the previous version - Vertex 2.

How are they different?

VERTEX 2

VERTEX 3

Salespeople:

  • DALI-2 certification – Vertex will be complied with the IEC 62386-103 standard and will be certified

Designers:

  • Increase of DALI buses output current - 230 mA instead of 180 mA

Installers:

  • Easy DALI bus diagnostic - measurement of the power consumption

  • Press-to-verify function – physical buttons on the panel for quick and easy DALI bus tests

Commissioners:

  • Refreshed user interface – Glamox visual identification, UX optimisation

  • Update of the NodeRed engine – interface for project management, multi-language support, work optimisation

The online E2D knowledge base applies to VERTEX version 3. Many of the features and guidelines are identical. However, when in doubt, use the PDF documentation below.

  • No labels