This documentation applies to the E2D system using VERTEX 2 & 3 with CLASSIC UI and software versions up to 3.1.29. If you have VERTEX 3 with software version 3.1.30 or higher, go to Glamox Ethernet2DALI
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 24 Next »

  1. Download the Vertex Firestarter app on your smartphone and install it:

    1. https://play.google.com/store/apps/details?id=com.your.company.VertexFirestarter&hl=pl

    2. https://apps.apple.com/us/app/vertex-firestarter/id1554823675

2. Take the WiFi card from the box. Insert the WiFi card into the USB port on the Vertex front panel.

3. Turn off and then turn on the power supply.

4. Connect to the network.

SSID: VERTEX_XXXXXXXXYYYY 
where XXXXXXXXYYYY is the Vertex's MAC address

PASSWORD: XXXXXXXX - first 8 characters of the MAC address

5. Run the Vertex Firestarter application on your smartphone and configure the network.

↪ The next step:

Setting up the network parameters with Firestarter

  • No labels