Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Vertex 3 provides information if the current on the DALI bus will be over 230 mA. This functionality will ensure that DALI current limits are met.

\uD83D\uDCD8 Instructions

  1. Log in to the Vertex GUI.

  2. In the System Status section, you will see a warning monit when the current on any bus will be exceeded (see photo below)

  3. Make sure that the devices on the DALI bus don’t consume more than 230 mA.

This monit will appear only when you will excess the allowed 230 mA. Real-time measurement of the DALI current should be performed using electrical instrumentation.

Filter by label

There are no items with the selected labels at this time.

  • No labels