This documentation applies to the E2D system using VERTEX 2 & 3 with CLASSIC UI and software versions up to 3.1.29. If you have VERTEX 3 with software version 3.1.30 or higher, go to Glamox Ethernet2DALI
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

  1. Download the Vertex Firestarter app on your smartphone and install it:

    1. https://play.google.com/store/apps/details?id=com.your.company.VertexFirestarter&hl=pl

    2. https://apps.apple.com/us/app/vertex-firestarter/id1554823675

2. Take the WiFi card from the box. Insert the WiFi card into the USB port on the Vertex front panel.

3. Turn off and then turn on the power supply.

4. Connect to the network.

SSID: VERTEX_XXXXXXXXYYYY 
where XXXXXXXXYYYY is the Vertex's serial number


PASSWORD: XXXXXXXX where first 8 characters of the serial number

5. Run the Vertex Firestarter application on your smartphone and configure the network.

See the next steps:

E2D commissioning

  • No labels