After you have added the simulated devices 3. Creating Simulated Devices, you need to identify and replace them with real devices.
...
Step by step instructions
Select Locate [1].
Ensure your DONGLE is connected and Bluetooth Symbol is illuminated. If not see 4. Connecting a DONGLE or DONGLE BLE
Select Find [2], if you are in the range of devices, the list will populate with up to 9 devices. If you keep finding devices you want to identify at a later time you can move them to the hold pen [3]. To release devices from hold pen click on it and you will be able to find those devices one more.
...
(3s) - will turn the lumianire on and off every 3 seconds until you click the button again [4]
On - will turn on the luminaire for 3 seconds [5]
Off - will turn the lumianire off [6]
...
| Expand | ||
|---|---|---|
| ||
To change the preset 3 seconds to a deferent time long click the (3s) button. A window will apear where you enter the desired time between 3 and 1800 seconds.  |
Once you know which luminaire it is, tap and hold the device and drop it over the simulated device. A Warning message will appear to advise you about replacing the device, click Yes [7].
If you have no simulated devices, click and hold the device and drag it onto the drawing and position it manually.
...
When locating luminaires and you find an emergency luminaire, select Configure [8] in the bottom left of the screen and select Emergency [9]on the left hand side. This will apply an 'E' to the selected luminaire for identification.
...
| Info |
|---|
Please be aware that this is a good moment to check if your lumianire is on the proper (newest) firmware versionFirmware Release Notes If not we recomend an update Checking & updating firmware |
↪ The next step: Creating profiles
...