Before you start
Make sure that the IP addresses of the gateways will be consistent, either by IT binding the mac address to a static IP (recommended) or by assigning static IP
The Access point WebUI from 5. will list all gateways on the network with current settings as long as multicast is enabled in the network
For Wireless Zigbee, log in to the web ui of the gateway to set IP if needed
For Ethernet2Dali, see Commissioning - step by step E2D commissioning
For DALI Complete you need to use an external tool, as the DALI gateway does not provide any WebUI
Recommended to use free software like for example Lantronix - Device installer
Glamox Connect enabling
Connect the gateways to power and ethernet.
If DALI gateway, also connect DALI line(s)
Connect the access point (LMS CONNECT RevPi Core 3 8 GB) to 24 V power and ethernet.
Make sure the access point has access to the network where the gateways are connected.
| Info |
|---|
Only the access point speaks to the Glamox Connect cloud. The access point communicates with all gateways and administers the two-way communication between the gateways and the cloud. |
| Note |
|---|
If your building doesn’t use a dynamic adress IP go to link: How to change DHCP to a static IP on Access Point |
4. Check the serial number of the access point (5 digits).
...
5. Go to URL http://GlamoxConnectCore<serial>.local
Example: http://GlamoxConnectCore30288GlamoxConnectCore30288.local- if the serial is 30288
| Note |
|---|
If your access point can’t find the gateways the main issue is probably that they are not on the same network. You can try to connect to the network yourself and search for devices - see “Alternatively”. |
...
| Info |
|---|
For Glamox technicians to reach the device, it is set up with ZeroTier. This requires UDP 9993 to be open out of the network. If the network is set up with DHCP, it will automatically connect, and the technicians can reach the device. As a fallback, a USB 4G modem can be connected to bypass any firewalls while setting up the system. |
8. Make sure you have configured your network or gateways to have fixed IP addresses, either by assigning static IP or by having your network provide a fixed IP. (See gateway notes below)9. Login to Glamox Connect using your existing user, or by creating a new User registration.
109. Create a new site a adopt the access point to your site Setting up a new site.
Network setup
Multicast (optional, access point to discover gateways)
DHCP (optional)
Internet access
...
| Note |
|---|
We HIGHLY recommend isolating the lighting components in a own network, without access to other components at your internal network setup. Glamox gateways only needs to be discoverable and reachable from access point Access point(s) needs to communicate with gateways, as well as the Glamox cloud servers |
DALI complete gateway
To change the IP on the DALI gateway, use a free tool like Lantronix (https://www.lantronix.com/products/deviceinstaller/). Make sure you are connected to the same network and search for devices.
...
The gateway has pullout panels on top and bottom of the front. Here you can find detailed information about the gateway like the mac address.
Wireless Zigbee gateway
The Zigbee gateway has a WebUI for easy setup. This WebUI can be reached from your access points WebUI at http://GlamoxConnectCore<serial>.localFollow gateway manual to go to admin pageubisys-g1-<serial>.local, replacing <serial> with the serial from your gateway. (Ex: ubisys-g1-2507.local).
Alternatively you can open the gateways IP address, default http://192.168.0.211.
You can change the network settings of the gateway under “Network settings”.
Ethernet2DALI
For information on setting up Ethernet2DALI, see our own documentation space for this system
https://glamox.atlassian.net/wiki/spaces/E2D Ethernet2Dali
Tested 4G modems
Huawei E3531
Note: USB 4G modems that acts as a network interface, without PIN code, can work. Try on your own machine to verify no drivers are needed, and the dongle acts as a normal network interface (no special software required)
...