Page Comparison

ZIGBEE PIR CLS SENSOR is a multisensor designed for the Glamox Wireless ZigBee Zigbee system.

It joins the functionality of daylight and movement/detection sensors. It can detect even slight, few-centimeters movements at the desk so it is suitable for areas like offices and classrooms, but also for corridors and main halls. It is recommended to install this multisensor in rooms up to 3 m high.

LMS ZIGBEE PIR CLS SENSOR Mod 01https://www.glamox.com/en/pbs/products/light-control/wireless-solutions/b12201003/

The sensor-head must be used together with the mounting device:

Device features

• Movement/occupancy detection (PIR) and daylight harvesting functionality

• Simple, 2-wire power supply

• Designed for indoor environments e.g. offices, classrooms, corridors

• Can be configured and maintained within the Glamox Wireless ZigBee app

• Control app for the end user via wUser

• Build-in antenna for Bluetooth Low Energy (BLE) and ZigBee communication

How to use it in the LMS design?

Limitations (stand from the firmware 2.0.20):

• The maximum number of multisensors in one group:

• 40 for full autonomy - only multisensors in the group

• 30 for a group with ZigBee switches

20 for a group with enabled energy reporting functionality

a single group - 120.

• The maximum number of switches in a single group - 15.

• Maximum distances (in the line of sight) between ZigBee Zigbee devices:

  • 12 m between multisensors

  • 10 m between ZigBee switch and the first multisensor

  The maximum number of switches in one group is 5.

• A single sensor can cooperate with up to 4 luminaire drivers (in case of tunable white, only 1 driver).When using a gateway (Glamox Connect), the limited to 1 driver per sensor to support Tunable White and Energy Reporting features).

Detection area

Major movement

Minor movement

How to commission it?

See Commissioning of Wireless Zigbee.