ZIGBEE PIR CLS SENSOR is a multisensor designed for the Glamox Wireless ZigBee Zigbee system.
It joins the functionality of daylight and movement/detection sensors. It can detect even slight, few-centimeters movements at the desk so it is suitable for areas like offices and classrooms, but also for corridors and main halls. It is recommended to install this multisensor in rooms up to 3 m high.
LMS ZIGBEE PIR CLS SENSOR Mod 01https://www.glamox.com/en/pbs/products/light-control/wireless-solutions/b12201003/
The sensor-head must be used together with the mounting device:
LMS ZIGBEE MNT SENSOR-R
LMS ZIGBEE MNT SENSOR-Shttps://www.glamox.com/en/pbs/products/outdoor-/spotlight/b12204001/
Device features
Movement/occupancy detection (PIR) and daylight harvesting functionality
Simple, 2-wire power supply
Designed for indoor environments e.g. offices, classrooms, corridors
Can be configured and maintained within the Glamox Wireless ZigBee app
Control app for the end user via wUser
Build-in antenna for Bluetooth Low Energy (BLE) and ZigBee communication
How to use it in the LMS design?
Limitations (stand from the firmware 2.0.20):
The maximum number of multisensors in one group:
40 for full autonomy - only multisensors in the group
30 for a group with ZigBee switches
20 for a group with enabled energy reporting functionalityThe maximum number of switches in a single group - 15.
Maximum distances (in the line of sight) between ZigBee Zigbee devices:
12 m between multisensors
10 m between ZigBee switch and the first multisensor
A single sensor can cooperate with up to 4 luminaire drivers (in case of tunable white, only 1 driver).When using a gateway (Glamox Connect), the limited to 1 driver per sensor to support Tunable White and Energy Reporting features).
a single group - 120.
| Info |
|---|
For the earlier firmware versions, limitations are given:
|
|
|
| Info |
|---|
With the firmware that is earlier than 2.0.20 the maximum number of multisensors in one network connected to the gateway is 40
|
Detection area
Major movement
Height (m) | X1 (m) | Y1 (m) |
|---|---|---|
2.4 | 2.9 | 4.3 |
3.0 | 3.6 | 5.4 |
Minor movement
Height (m) | X1 (m) | Y1 (m) |
|---|---|---|
2.4 | 1.9 | 2.9 |
3.0 | 2.4 | 3.6 |
LED indicator | 🔴 - motion detected |
How to commission it?
The device can be commissioned and configured via the commissioning app - Glamox Wireless ZigBee which you can find for both Android and for iOS.
Additional user application - Glamox wUser, enables end users to control the light intensity of luminaires.
See how to start Commissioning of Wireless Zigbee.