B07004009
The multisensor is suitable for ceiling hights heights up to 10m 16m in applications such as factory buildings, storage buildings, warehouses, shopping centers, entry areas and passages.
LMS DALI-2 PIR CLS SENSORHEAD 16Mhttps://www.glamox.com/en/pbs/products/light-control/cabled-solutions/b07004009/
B07004009
The sensor-head must be used together with the mounting device:
LMS DALI-2 MNT BOX 16M SENSOR IP65
How to use it in the LMS design?
When using the multisensor in a project, you need to remember the typical Ethernet2DALI limitations.
https://www.glamox.com/en/pbs/products/outdoor-/spotlight/b07004007/
B07004007
Sensor covers
Sensor covers give the ability to reduce the detection area in aisle applications. These covers can be simply attached or removed from /to the front of the sensor at any time without the need of opening the luminaire.
LMS DALI-2 16M SENSOR ASILECOVER
B07004010
ExampleUsage: Sensor This sensor cover is used in aisles between storage racks. Thanks to this, so the sensor does not react to movement in the adjacent aisleaisles.
LMS DALI-2 16M SENSOR HALFCOVER
B07004008
ExampleUsage: Sensor This sensor cover is used in open space, along which the corridor runs. Thanks to this, people moving around the office will not turn on the lights in the corridorspaces. The cover ensures that people moving in the adjacent space will not activate the lights.
LMS DALI-2 16M SENSOR ENTRYCOVER
B07004011
ExampleUsage: Sensor cover at the entrance. Thanks to this, This sensor cover is used in entrances, so only the person entering the room will turn on the light.
How to use it in the LMS design?
When using the multisensor in a project, you need to remember the typical Ethernet2DALI limitations.
How to commission it?
Go to Sensor Commissioning
| Info |
|---|
For other sensors look here: E2D components |