Overview

Room reports are available from the Room window top menu bar, or through the "Calculated result" option for Project reports.

Basic summary

To create a basic summary you just have to press the "Report" button once inside the report window.

The basic summary includes room characteristics, calculation results, luminaire data and an ISOLux-diagram for the room calculation plane.

Checking the option "Define your own report" will enable all the options in this window:

The upper section contains various report parts that can be included or excluded.
The middle section contains various room objects that can be included/excluded.
The lower section contains some global options for the report.

Note: to include emergency calculations for a custom report, the "emergency light" option must be checked for the room calculation area.

This is the basic summary page, and must always be included.

Check this option to include a coordinate list and an overview of the room with numbered luminaires.

Check this option to include a 3D drawing of the room (isometric view).

Check this option to include detailed luminaire information for all luminaires used in the room.

Include UGR data for the luminaires

Checking this option will include page with maintenance instructions for rooms planned with the advanced maintenance factor.

Check this option to include all active user views for the room.

Include all Lighting Scenarios for the room.

These are the display options used for calculation results in the report. The default values are the room calculation plane options.

Update border values for ISO curves displayed in the report

Re-calculate ISO border values before running report. Overrides “Change ISO level“.

Checking this option will remove the Glamox logo from the reports.

Add an extra image to all IsoLux diagrams showing where in the room the plane is located.

If the plane position is obscured by room geometry, check “Show from rear” to show position from the other side of the room.

Check this option to include the 2D/3D model background data in reports.

Exclude non-luminaire objects (like paneled ceilings) from the report views.

Check this option to include the CAD import origin in the coordinate list.

Clip (remove) any parts of the 3D background that are outside the room.

Include 3D model from CAD file instead of the background saved to the room.