7. Linking

Presence

Presence linking allows actication of other lumianires when a sensor in a specific lumainire detects presence. You can create individual or multiple links.

Create individual links

1. Select Luminaires [1] and Link [2].

2. Determine the two fittings to be linked and drag your finger between the two devices.

3. If you require a bi-directional link, draw a line back the other way.

Create multiple links

1. Select the group of luminaires you'd like to link by dragging your finger over them.

2. You will be presented with 6 options:

• Link All(xx) - This will link all luminaires together so that presence detected on any sensor will turn the other linked fittings on.

• Unlink All - This will remove all presence links for the group of devices.

• Link From X - This will provide a link from another device. If you select this option you will be prompted to enter the full device serial ID.

• Link To X - This will provide a link to another device. If you select this option you will be prompted to enter the full device number.

• Link to Self – Link luminaires to themselves so they will operate independently.

• Me & 8 - This will allow for smaller groups of fittings to be linked within a large group and is typically used in open areas. The '8' can be changed to a larger number with a long press on the 'Me & 8' button. To implement and alter Me & 8:

  • Highlight the whole group to be controlled in this way

  • Long press Me&8

  • A popup box will prompt you to enter the group size > save

  • Press the Me&xx button again (this will now display the number you entered)

  • A diagram will appear on the drawing

  • Confirm to apply or cancel to change

3. Ensure all the fittings and links are blue and Synced - using the Sync button [4] in the top left.

Daylight

↪ The next step: Backup