Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

This article shows how to connect Greenpower switch when you have BLE Dongle connected and luminaire is identified.

Necessary components

Connecting a DONGLE

LMS WIRELESS TABLET

  • NEED TO ADD 4-WAY ENOCEAN BUTTON

  • NEED TO ADD 2-WAY ENOCEAN BUTTON

Requires a Glamox Wireless Radio luminiare with CPW2-SEN sensor.

Step by step instructions

To have connection with greenpower switch you have to press button in specific way.

image-20240701-093834.png

  1. Enter the Luminaires tab and choose the open the configure option. Choose master luminaire and turn on enocean checkbox. In the box there will be a change from “-” to “EO”.
    The EnOcean ID will be last three digits of the luminiare and adding a zero.

image-20240703-091938.png

  1. Open the greenpower icon and select the scene profile related to our luminaire.

Go to the Profiles tab and create a profile that you will be using for Greenpower switches and make sure that LiteIP is set to SceneController and Driver is set to DALI. If you would like to dim up and down luminaire also remember to check Dim Up/Down box. Click save changes.

image-20240703-093758.png

Now in the Luminaires tab you can select scene profile for your lumianire.

image-20240703-093122.png

  1. Setting up the scenes

In the luminaires tab click on the EnOcean icon again so that the upper left corner ID number of controller can bee seen.

image-20240703-095557.png

Go To the Scenes tab and select scene controller with the same ID so in this case 10162240. Each scene corresponds to a button . In one scene you can control many luminaire with different profiles.

image-20240703-100040.png

image-20240701-085845.png

image-20240701-085900.png

You can also go into advanced scenes settings. To do that go to the profiles tab and select Advanced

image-20240703-101423.png

If you come back to the scenes tab again there will be much more settings here.

New options that will appear are:
- Rank
- Cmd
- Hops
- Delay
Synchronise Profiles box


If you check Synchronise Profiles box all setting will be the same for all profiles.

image-20240703-101645.png

  1. Linking the luminaires

In the Luminaires tab go to Link and select all luminaires. Then go to the Link From X option, a box will open called “link form” type entire number of greenpower button which you want the luminaires linked to.

image-20240703-102105.pngimage-20240703-102218.png

  1. Pair greenpower switch

As the last step press the Pair button. If pairing is successful the master luminaire should blink three times.

image-20240703-102733.png

  • No labels