Release information
Device name | LMS ZIGBEE SENSOR |
Release date | 30.06.2022 |
Summary
This is the first 2.X.X firmware that no longer needs to be stored in the smartphone memory but is available in-app (Glamox Wireless ZigBee 1.10 and later). Updating firmware from 1.X.X to 2.X.X requires switches to be recommissioned.
2.X.XX firmware for ZIGBEE SENSOR works together only with the 1.10 Glamox Wireless ZigBee App version.
Highlights
News:
Large networks - the possibility to create group with up to 120 devices has been done.
Non-commissioned sensor behavior: local daylight and motion sensing before commissioning,
Speed improvements for grouping of lights and switch commissioning have been done.
Availability of D4I driver data in the Zigbee interface has been added.
Custom product naming: use of driver memory banks to change the name shown in the app.
Fixes:
Solved limitations of earlier version:
When a gateway with an automation profile is added to a group, circadian rhythm must be switched on in the app, otherwise, unpredictable light behavior will occur.
Removing individual lights from daylight area is not possible. The daylight area needs to be removed and recreated.
Firmware 2.x devices are not compatible with Firmware 1.x devices. To combine old and new sensor, they require an update to the same firmware version. The update of 1.x devices to firmware 2.x will be enabled with a future app update. A downgrade from firmware 2.x to 1.x is not possible.
With this phase-over, IR capabilities from the sensor are removed.
Software download
Build inside the app
0 Comments