Release information
Device name | LMS ZIGBEE SENSOR (Product page) |
Release date | 30.06.2022 |
Overview
This is the first 2.0 Firmware (FW) which no longer needs to be stored in the smartphone memory, but it is available in-app (1.10 and later). Changing FW from 1.0 to 2.0 require switches to be recommissioned.
2.X.XX firmware for ZIGBEE SENSOR works together only with the 1.10 App version.
Functionality upgrade from FW 1.2.12 to FW 2.0.20
Large networks: possibility to create group with up to 120 devices,
Non-commissioned sensor behavior: local daylight and motion sensing before commissioning,
Speed improvements for grouping of lights and switch commissioning,
D4I Data on Zigbee: availability of D4I driver data on the Zigbee interface,
Custom product naming: use of driver memory banks to change the name shown in the app.
Solved limitations of earlier version:
When a gateway with an automation profile is added to a group, circadian rhythm must be switched on in the app, otherwise, unpredictable light behavior will occur.
Removing individual lights from daylight area is not possible. The daylight area needs to be removed and recreated.
Firmware 2.x devices are not compatible with Firmware 1.x devices. To combine old and new sensor, they require an update to the same firmware version. The update of 1.x devices to firmware 2.x will be enabled with a future app update. A downgrade from firmware 2.x to 1.x is not possible.
With this phase-over, IR capabilities from the sensor are removed.
Software download
Build inside the app
0 Comments