You can use your tablet and DONGLE to check the status of your self-test or DALI emergency luminaires. This should be done once per month if you have an offline system (no ACCESS POINTs) to ensure faults are checked and corrected.
...
Make sure your Glamox Dongle is connected and you are standing in the area of the emergency lighting.
In Cloud Control [1], make sure ‘Write Access’, ‘Master' and 'Uploading’ is selected [2].
...
Select the drawing you wish to scan the emergency data for [3].
Click on the Emergency tab [4].
...
Click ‘Scan’ [5].
All unscanned devices will appear with a blue circle around the device icons. Once the Glamox Dongle has been able to talk to all devices within range, a message will say 'Scanning in this area is complete'.
| Info |
|---|
All non-emergency luminaires will be greyed out. |
...
Repeat this process until all luminaires on the drawing has been scanned.
Once you have updated all emergency luminaires in that area, move to the next drawing and repeat the process.
...
Uploading the newly scanned emergency statueses
...
Click ‘Yes’ to override the current server data [6].
...
Click ‘Re-Sync’ again.
| Info |
|---|
Once you have sync’d the Site data with the server, please contact lms.support@glamox.com to manually accept the new emergnecy data change. |
...