This article has two sections:
Importing drawings
| Info |
|---|
All imported drawings need to be converted to 1220 pixels x 660 pixels, this includes a 60 pixel frame you need to add for ease of use. |
Select Drawings [1].
...
...
2. Select New [2] and then
...
Browse [3].
...
...
Select the required drawing from the file
...
manager.
...
Enter the drawing width and click Save [4].
...
| Expand | ||
|---|---|---|
| ||
If your imported drawings has a diagnal outline and you want your drawing to include that enter the modifying mode and long click on a corner and red dots will appear on corners of the drawing. This will allow you to move corners. If you want to add an additional point to a line simply long click on a line where you want to brake it and an additional red dot will appear. Note: If you move an outline some objects like windows and doors might not work correctly.  |
...
Creating drawings
If no drawings exist, then manual drawings can be created:
Select Drawings > New > Create
...
2. Name the drawings.
3. Enter an x need to be created. Remeber not to use the Area 1 drawing and create a new drawing or you will be forced to delete your drawing.
Select Drawings [1].
...
Select New [2] and then Create [3].
...
Enter a Filename for the drawing.
Enter an 'x' dimension for the width of the area being created.
...
Once created click
Modify to:
add a Door(s)
add a Window(s)
add simulated furniture
add a 600x600 or 1mx1m ceiling grid
block out areas to reflect the room’s shape
...
| Info |
|---|
If you add any of these modifications you must click save before being able to proceed. |
↪ The next step:
...