Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The commissioning software has a function to help you to locate devices which you cannot identify when pressing Find.

...

Identifing potential misplaced devices

  1. Hold the DONGLE close to the luminaire you’re trying to identify

  2. Tap Luminaires [1] > Locate [2] > Track [3]

...

    Results

    Images

    1. Luminaires will appear in the Find Box as follows [4].

    ...

      ...

      1. Each luminaire in the find box will show the following results:

      Result

      Icon Example

      Description and action

      No Box Around Device

      image-20240301-114837.pngImage Added

      New, unfound un-commissioned light.

      Red Box Around Device

      image-20240301-114728.pngImage Added

      Light has been found on a different drawing. Tap the light and a message will be displayed which will show you which drawing it’s on.

      Orange Box Around Device

      image-20240301-114813.pngImage Added

      Light is on the drawing you have currently selected. Tap the light to highlight it on the drawing.

      ...

      Identifying overlapped devices

      When moving devices around or adding new devices to the drawing, it’s possible to accidentally overlap two devices.

      1. If

      ...

      1. this happens a red square will appear around the fittings.

      ...

      1. Tap on the device to show the following message [5]

      ...

      1. To remove the overlapped fitting tap and hold the device and drag one to another location on the drawing and then reposition both as required.