Using this template, you will be able to control the color temperature using a standard pushbutton. The standard values in the template are set to this:
...
Copy the flow above and paste it into an empty flow.
Select your device at Serial Number field [1]. Select the DALI-2 Input Unit [2] (which is one physical button) in Dali2Device field and set the Mode to ESDIM mode [3].
...
2. Select the luminaire group in the vertex action node [4].
...
If you don’t want to change the CCT values click Done and Deploy!
...
The CCT button is a subflow elegantly hidden in one node. To configure the parameters within the CCT button node click the node to enter the configuration window and select the Edit subflow template [5].
...
Then you will see the following subflow structure.
...
To change the CCT values you will need to edit the function nodes called 2700K and 6500K [6]. Click the nodes to enter the editing window and change the desired CCT values.
...
The step variable affects how fast the colour will increase or decrease, open the increase/decrease colour step value and change the step value [7].
...
You can also change the start value for colour changing. You can set these values by clicking the start colour increase/decrease node and changing the desired value [8].
...
Go back to the main flow. Select the luminaire group in the vertex action node [9].
...
4. Do not forget to click Done and Deploy!
...