...

Summary

This is the first 2.X.X firmware that no longer needs to be stored in the smartphone memory but is available in-app (Glamox Wireless ZigBee 1.10 and later). Updating firmware from 1.X.X to 2.X.X requires switches to be recommissioned.

...

• Large networks - the possibility to create group groups with up to 120 devices has been each was done.

• Non-commissioned sensor behavior: local daylight and motion sensing before commissioning,The sensor operation before commissioning was set to daylight control and motion detection by default.

• Speed improvements for grouping of lights and switch commissioning have been were done.

• Availability of D4I driver data in the Zigbee interface has been was added.

• Custom The possibility of custom product naming : use of driver memory banks to change the name shown in the app was added.

Fixes:

• Solved limitations of earlier version:

  When

  The problem with unpredictable light behaviour, while using a gateway with an automation profile

  is added to a group, circadian rhythm must be switched on in the app, otherwise, unpredictable light behavior will occur.Removing individual lights from daylight area is not possible. The daylight area needs to be removed and recreated.

  and the “Circadian rhythm” option switched off, was solved.

• The problem of removing individual lights from daylight areas, which was previously impossible, was solved.

...

...

...

...

...

...

...

...

...

...

...

With this phase-over, IR capabilities from the sensor are removed.

Software download