Glamox Wireless Radio is based on the principle that all luminaires have the same rank in the network. There are no masters, or all are masters. From the system point of view all luminaire contains a luminaire controller and, if possible, a sensora Light Management System that communicates using Radio frequencies between the devices and through Bluetooth with the user tablet.
But these are not all the components that can create the system. Let’s take a look at what types of components we can use
...
[1] Tablet & Dongle - The tablet is the installer's main tool for setting parameters and identifying luminaires.The dongle is a communication device that translates Bluetooth from the tablet to radio communication that goes on between the devices.
[2] Luminaire with WR sensor - we use three main sensors for inegration with lumiaires: CPW2-sen, CHW-sen and CHW16-sen.
[3, 4, 5] DALI luminaire, External sensor and Bridge - this group of components let’s you add luminaires and sensors to the system without integration, it is a great solution for adding descorative lumiaires to the Wireless Radio system.
[6, 7] Pushbuttons and Scene controller - a scene controller let’s you create scenes, when you pair it with pushbuttons it allows to create many different settings
[8] Access point - if you wish to monitor your installation, you will need an access point [8].
[9] Emergency - Wireless radio also integrates emergency lighting very well.
Info |
---|
All devices only need 230 V |
...
power supply with exception of a battery powered scene controller |
...
The dynamic grouping makes the system flexible without limiting the installation to typical parameters as Number of groups or Number of devices belonging to a group.
The parameter that set some limitations for this system is related to the environmental conditions for wireless communication on the building site. In complex installations with steel ceiling structures etc. we recommend adding some Luminaire controllers to be used as repeaters in the installation.
There are also some limitations on the range for the Access points so please remember that a device can communicate with more than one access point. Adding a new access point will NOT lead to the new commissioning of the existing network. So if you are uncertain if you need another access point just add one
. |
Glamox Wireless Radio is based on the principle that all luminaires have the same rank in the network. There are no masters, or all are masters. From the system point of view all luminaire contain a luminaire controller and, if possible, a sensor.