After you have added the simulated devices 3. Creating Simulated Devices, you need to identify and replace them with real devices.
Step by step instructions
Select Locate [1].
Ensure your DONGLE is connected and Bluetooth Symbol is illuminated (. If not see 4. Connecting a DONGLE or DONGLE ).BLE
Select Find [2], if you are in the range of devices, the list will populate with up to 9 devices.
| Info |
|---|
It will be required to move around the site to locate all of the luminaires. |
...
| Info |
|---|
Blue icon of light means it's synchronised and good. Green dot on top means the light is on. |
Tap on the device and use the Override Off [3] button on the top left of the screen. This will turn the luminaire off for 3 seconds to allow you to identify which luminaire it is.
...
Once you know which luminaire it is, tap and hold the device and drop it over the simulated device.
A Warning message will appear to advise you about replacing the device, click Yes [4].
...
Once you have located all of the luminaires in the Find bar, select
...
When locating luminaires and you find an emergency luminaire, select Configure [5] in the bottom left of the screen and select Emergency [6]on the left hand side. This will apply an 'E' to the selected luminaire for identification.
...