Array devices
You can improve the speed and accuracy of the commissioning process by adding simulated devices to the drawings before starting on-site work. This allows for luminaire positions to be allocated and adjusted.
Select Luminaires [1]> Locate [2].
Drag your finger across the drawing from top left to bottom right. An A transparant beige box will appear along with 'Group Commands' on the left hand side.
...
Select Simulate Array > Enter Column Quantity (1-9) > Save > Enter Rows (1-3) > Save. The number of simulated luminaires will appear on the drawing.
...
If you need to move the group (or a smaller group), drag your finger across the group and use the arrow d-pad in the bottom right of the screen.
| Info |
|---|
Repeat the process to add more arrays of luminaires. |
...
Individual devices
Once you have simulated arrays for the majority of the devices it may be necessary to add one or two additional luminaires manually:
Select Luminaires [1]> Locate [2].
...
Tap in the white bar below Find [3], this will add an individual simulated device.
...