Necessary components
...
Installation
When installing an ACCESS POINT it’s important to consider the following:
...
| Info |
|---|
If you require additional coverage more ACCESS POINTs can be added at anytime and no additional commissioning will be required. Lights can report to more than one ACCESS POINT. |
...
Connections
ACCESS POINTs can be supplied with 4G connections or Ethernet and Wi-Fi adapters.
4G
A 4G add on pack is available supplied with 12 months data. At the end of the 12 month period, clients can maintain their own SIM contracts.
4G provides connectivity without involving the client’s IT infrastructure and is generally suitable for all environments which receive a mobile signal.
Monitoring uses approximately 1 Gb per 1,000 luminaires per month for monitoring with additional data used for.
Ethernet
Provides a free wired communication.
Ethernet is free from the interference of Wi-Fi networks, walls or other physical barriers.
When using this option it is important to consider the feasibility of installing Ethernet points across an existing building to ensure full coverage.
Wi-Fi
Wi-Fi provides a connection where it is difficult to install Ethernet points. When using this option is important to consider the stability of the Wi-Fi connection in the building. If the Wi-Fi drops out or the password is changed, then the ACCESS POINT will lose connection to the internet and, without providing an alternative connection, cannot be re-established.
...
Security - Ethernet & Wi-Fi Only
The internet connection requires DHCP and the following permissions:
Destination Address | Destination Port(s) | |
TCP 80 | TCP 443 | |
TCP 80 | TCP 443 | |
TCP 5938 | ||
TCP 443 | TCP 1883 | |
TCP 443 | TCP 8883 | |
...
Power Consumption
3 W minimum
5 W average
15 W peak
LED Status Codes
Green Status:
Off | Program Not Started |
Solid | Connected to Server: Located |
4s On 1s Off | Connected to Server: Not Located |
1s On 4s Off | Not connected to Server |
Red Status:
Solid | Program Starting |
Off | No Faults |
1s On 4s Off | < 5% EM Lights Reporting Errors |
4s On 1s Off | ≥ 5% EM Lights Reporting Errors |