Before you start
...
Connect the gateways to power and ethernet.
If DALI gateway, also connect DALI line(s)
Connect the access point (LMS CONNECT RevPi Core 3 8 GB) to 24 V power and ethernet.
Make sure the access point has access to the network where the gateways are connected.
| Info |
|---|
Only the access point speaks to the Glamox Connect cloud. The access point communicates with all gateways and administers the two-way communication between the gateways and the cloud. |
| Note |
|---|
If your building doesn’t use a dynamic adress IP go to link: How to change DHCP to a static IP on Access Point |
4. Check the serial number of the access point (5 digits).
...
5. Go to URL http://GlamoxConnectCore<serial>.local
Example: http://GlamoxConnectCore30288.local- if the serial is 30288
...